FLOOR COATING SOLUTIONS
– Epoxy primer
Versatile Epoxy Primer used as the prime coat for both Epoxy and Polyurethane floor coating and Epoxy Screed. It is a low viscosity two component epoxy resin coating on concrete and other mineral surfaces.
A two-component solvent free epoxy floor coating system, which is designed for continuous protection in light to heavy-duty application. It provides a high gloss, seamless, surface that is hard-wearing and durable. The system consists of pre weighed colored base and hardener components. It cures to a semi gloss finished and easily clean. The coating can also be applied to provide a non-slip texture and may be top coated if required
High Build Solvent Free Polyurethane coatings. A two-component solvent Free Polyurethane applied coating provides slip resistant, chemical, abrasion resistant and completely waterproof floor finish.
SL 501 provides special Epoxy floor screed with very high mechanical strength for abrasion and chemical resistance.
– SL 502
An applicable in public and industrial buildings, for leveling and smoothing new or existing concrete in thickness from 5 to 50 mm, to make them suitable for heavy pedestrian.
– TG113 Grout
Two pack Water born Epoxy Cement Grout and Screed. Powder mix is specially blended with Epoxy resin and the hardener is packed separately for mixing at site with required amount of water.
– TG113 C
A non flowing epoxy bedding compound suitable for a variety of bedding, gap filling and concrete repair applications. It is a two-component mortar filled with selected fine aggregates.
For the complete overview and all specifications of our water proofing solutions you can download the below PDFs for your reference.